Completion
Complete each
statement.
|
|
|
1.
|
Always use the type of tool
that was ________________ for the work you want to do. Choose the right tool for the
job.
|
|
|
2.
|
Use the right ________________
tool and be sure the tools are clean and in good condition.
|
|
|
3.
|
You should never use your hands
or _____________ to test whether or not a tool is sharp.
|
|
|
4.
|
Check the handle on the tool to
be sure it is fitted _____________.
|
|
|
5.
|
Don’t use any tools that
are dull, broken, damaged or defective in any way. Defective equipment should be reported to your
____________.
|
|
|
6.
|
Always hold and carry the tools
by their ____________.
|
|
|
7.
|
Carrying tools in your
___________ is dangerous. You could be hurt and the tool could be damaged.
|
|
|
8.
|
When handing someone a tool,
hold it so the other person can take it by the handle, or ____________ so they can pick it up by the
handle.
|
|
|
9.
|
____________ the work so that
your have both hands free to use the tools. Don’t hold the work with one hand and use the tools
with other hand.
|
|
|
10.
|
Always wear ___________. Use a
face shield, safety goggles or safety glasses.
|
|
|
11.
|
Don’t use wrenches that
are worn or damaged in any way, and keep wrenches free of oil or _____________.
|
|
|
12.
|
Always use the correct
____________ of wrench and the right size wrench.
|
|
|
13.
|
Don’t use a hammer or a
mallet on a wrench, and don’t try to extend the length of the wrench handle. Use only the
______________ of the wrench itself.
|
|
|
14.
|
Use the correct type of file
for the work, and keep files clean. Use a ________________ or a file card to keep files from
clogging.
|
|
|
15.
|
Use a brush or a _____________
to wipe up metal fillings, chips, and dust. Never use your hands to wipe away metal
waste.
|
|
|
16.
|
Before you use a hammer, make
sure the hammer _____________ is firmly secured on the handle.
|
|
|
17.
|
When you use a mallet or a
soft-faced hammer, keep your head and body out of the line of a possible
___________.
|
|
|
18.
|
Hold the mallet or the hammer
so its strikes ______________, and not at an angle or off-center.
|
|
|
19.
|
Never use a chisel with a
battered, chipped or ____________ head.
|
|
|
20.
|
When you’re finished with
the tools, clean them and return them to their assigned _________________ area.
|