Completion
Complete each
statement.
|
|
|
1.
|
Do not operate the metal lathe without ____________
from the instructor.
|
|
|
2.
|
Always wear eye ____________.
|
|
|
3.
|
Remove ____________ fitting clothing while using
the lathe; roll up long sleeves.
|
|
|
4.
|
____________ all wrenches, oil cans, and other
materials from the work area before starting the machine.
|
|
|
5.
|
Be sure the ____________ is properly mounted on the
spindle.
|
|
|
6.
|
The ____________ should start and stop the
machine.
|
|
|
7.
|
Never reach across the work when the machine is
____________.
|
|
|
8.
|
Properly center and ____________ the material
before starting the machine.
|
|
|
9.
|
Turn the stock by ____________ several times to
check for security and proper tool rest clearance.
|
|
|
10.
|
ALWAYS remove the chuck ____________ before turning
the machine on.
|
|
|
11.
|
Operate the lathe at the proper ____________ based
on the type and diameter of the material.
|
|
|
12.
|
Have all ____________ in place before operating the
lathe.
|
|
|
13.
|
Stop the machine prior to making any
____________.
|
|
|
14.
|
____________ the machine for all
measurements.
|
|
|
15.
|
Stop the ____________ before the tool reaches the
jaws of the chuck.
|