Completion
Complete each
statement.
|
|
|
1.
|
Always wear eye _______________.
|
|
|
2.
|
You must have the instructor’s _______________ before you use any of the
equipment.
|
|
|
3.
|
Use the power equipment only if you understand how to use it correctly and
_______________.
|
|
|
4.
|
The _______________ must be present in the shop whenever you use power
equipment.
|
|
|
5.
|
Use the power tools only when you can give your full _______________ to what you
are doing.
|
|
|
6.
|
When you work with _______________, you must make sure your hands are dry and
the floor you stand on is dry.
|
|
|
7.
|
When you approach a machine to use it, make sure the person who used it before
you turned it off and it is completely _______________.
|
|
|
8.
|
The cutting tool in the machine must be _______________ and in good
condition.
|
|
|
9.
|
Be sure the _______________ is installed properly and adjusted correctly for
what you want to do.
|
|
|
10.
|
Check to see that the _______________ are in place and working properly.
|
|
|
11.
|
Do not _______________ any safety guards unless you have the instructor’s
permission.
|
|
|
12.
|
If a machine doesn’t work properly, or if it doesn’t _______________
right, turn it off and tell the instructor.
|
|
|
13.
|
Power tools should be used only for what they are _______________ to do.
|
|
|
14.
|
Get permission before you make any major _______________ or changes on the
equipment.
|
|
|
15.
|
_______________ the power to the machine before you make any major adjustments
or changes.
|
|
|
16.
|
If you disconnect the power at the circuit breaker panel, put up a
_______________ that warns others not to connect it.
|
|
|
17.
|
The machine must be turned off and _______________ stopped before any minor
adjustments are made.
|
|
|
18.
|
Work in well _______________ areas so you can see clearly.
|
|
|
19.
|
Keep yourself _______________. Don’t over-reach or lean on a
machine.
|
|
|
20.
|
The material must be clean, free of _______________, hardware or
finishes.
|
|
|
21.
|
The cut must not be started until the machine is running at _______________
speed.
|
|
|
22.
|
Use an even, steady pressure to make the cut. Don’t _______________
it or over-load the machine.
|
|
|
23.
|
If the material is large or heavy, get help. Ask someone to
_______________ for you.
|
|
|
24.
|
Ask the instructor to _______________ any special set-ups or attachments before
you use them.
|
|
|
25.
|
Don’t let anyone _______________ you while you operate the
equipment.
|
|
|
26.
|
Use a piece of scrap wood, a push stick or a _______________ to clear away
scraps or dust. Do not use your hands.
|