Completion
Complete each
sentence or statement.
|
|
|
1.
|
Use the right type of
blade and make sure the blade is _______________ and in good condition.
|
|
|
2.
|
Use the _______________ and other safety
devices.
|
|
|
3.
|
Get permission before you change the blade or make
any other major _______________ on the saw.
|
|
|
4.
|
The blade should be raised so it is no more than
____________ inch above the material being cut.
|
|
|
5.
|
Never use the _______________ as a guide when you
cut across the width of the material.
|
|
|
6.
|
_______________ saw freehanded on the table
saw.
|
|
|
7.
|
The material must be straight. Do not cut
_______________ material on the table saw.
|
|
|
8.
|
The wood must be in good condition with no
______________ or hardware in it.
|
|
|
9.
|
Keep your hands and arms away from the blade and
avoid reaching over the _______________ of the blade.
|
|
|
10.
|
Do not start the cut until the saw has come up to
_______________ speed.
|
|
|
11.
|
The material must be held down _______________
against the surface of the table and along the rip fence as it moves past the blade.
|
|
|
12.
|
To avoid injury from a kick-back, stay out of the
area directly _______________ the blade and the material being cut.
|
|
|
13.
|
Never back out of a cut while the saw is
_______________.
|
|
|
14.
|
Always ask for help when cutting a _______________
piece of material. Ask someone to “tail-off” for you.
|
|
|
15.
|
Do not do anything on the saw that hasn’t
been _______________ for you.
|
|
|
16.
|
The saw must be _______________ before any major
adjustments or changes can be made.
|
|
|
17.
|
Always use a _______________ when making narrow
cuts.
|
|
|
18.
|
When the rip fence is used as a guide, be sure it is _______________ in place
before you start the cut.
|
|
|
19.
|
Be sure the blade is ________________ correctly, and that the teeth are pointing
toward the infeed side of the table.
|
|
|
20.
|
Get instructor’s permission if you need to cut ________________ or
cylindrical stock.
|